Ming Yu laser fiber laser marking machine cleaning and maintenance precautions

Release time:2024-08-19

Optical fiber laser marking machine with its high precision and stability occupies an important position in industrial production. In order to maintain its excellent performance, regular cleaning and maintenance is essential. The following are some precautions for cleaning and maintenance of Mingyu laser fiber laser marking machine:

1. Cleaning and maintenance of guide rail

The guide rail of the optical fiber laser marking machine is directly facing the part of the workpiece to be processed, so during the engraving process, impurities such as debris generated by the workpiece and dust in the surrounding environment are easy to adhere to the guide rail. A long time without cleaning will lead to rail wear. It is recommended to use gasoline to clean the guide rail every week, dry it after cleaning and add an appropriate amount of lubricating oil. Please note that oil should not be added to the belt during cleaning and refueling.

Second, the controller cleaning and maintenance

The controller of the laser fiber laser marking machine is exposed to the air for a long time and is easy to accumulate ash. Not cleaning for a long time may lead to a short circuit. Therefore, it is recommended to turn off the power of the controller regularly, open the outer cover of the box, and use clean compressed air to blow the dust inside. At the same time, attention should be paid to the dustproof work inside the chassis.

Three, computer maintenance

Computer is an important part of Mingyu Laser fiber laser marking machine. After running for a long time, a large number of junk files will be generated inside the system. If not cleaned up in time, the normal running of the software will be directly affected. It is recommended to clean up the junk files inside the computer regularly to maintain the good running state of the software.

Four, mechanical part maintenance and maintenance

X, Y axis slide rod need to add more than 20# oil once a week, and hold the marking head in the X, Y direction and move back and forth several times to ensure the smooth slide rod.
Check the connection between XY shaft motor and synchronous pulley regularly for loosening, it is recommended to check once every three months.
Periodically check the tightness of the XY axis belt (every three months) to ensure that the belt is working properly.
Periodically check whether the XY shaft synchronization belt fastening block is loose (once every three months), and tighten it in time if it is loose.
Keep the marking head cylinder liner clean to avoid dust, iron chips, etc. entering the cylinder or copper liner. Add lubricating oil before use every day to ensure smooth operation of the marking head.

When the air source is connected, the two connectors automatically drain water. At this time, there will be gas discharge, and the marking machine will return to normal after a few minutes. It is recommended to check the normal operation of the pneumatic twin every six months.

The needle can be repaired after wear. The method of removing the needle is to unscrew the needle sleeve to the left and remove the rubber gasket to remove the needle and the reset spring.
The travel switch is not allowed to have oil and iron filings and other impurities, should be kept clean.
The compressed air should meet the standards set forth in the technical requirements to ensure the normal operation of the marking machine.
By following the above cleaning and maintenance precautions, you can ensure that Mingyu Laser Fiber laser marking machines are always in optimal working condition to provide efficient and stable service for production.

Keywords：Laser marking machine manufacturer,Handheld laser marking machine,Fiber laser marking machine,UV laser marking machine,Handheld laser marking machine,CO2 laser marking machine,Automated laser marking machine,Visual laser marking machine,Portable laser marking machine,Changzhou laser marking machine,Flying laser marking machine

Mingyu Laser marking machine use and maintenance guide

Introduction of Ming Yu Laser UV laser marking machine

Mingyu Laser marking machine use and maintenance guide

Introduction of Ming Yu Laser UV laser marking machine